Boca Raton seawall repair
Seawalls usually fail slowly, then all at once. Catching the problem at the repair stage is the cheapest outcome on a Boca Raton canal lot.
What a repair usually covers
- Cap repair. Cracked or spalled concrete on top of the wall, often with rusting steel showing through.
- Joint and seam repair. Stopping fill from escaping between panels, typically with new filter fabric or grout injected behind the joint.
- Tieback and anchor work. Corroded tiebacks let panels rotate toward the water. A contractor may add new anchors to hold the wall back.
- Toe protection. Rock or riprap at the base of the wall to stop the canal from scouring out the bottom.
- Washout repair. Refilling voids behind the wall, but only after the leak that caused them is found and fixed.
Start a free request
Pick what you need. Five short questions.
Holes behind the wall are the urgent one
A hole or soft spot in the yard means fill is leaving through the wall. Every tide cycle can pull out more. The hole you can see is usually smaller than the void under it.
Keep people, mowers, and vehicles off the area. Do not just shovel dirt into it. That hides the void, and the fill washes out the same way. Have a contractor find where it is leaking first.
Repair or replace?
Repair makes sense when the panels are mostly plumb and sound and the problem is local: one joint, one section of cap, a few tiebacks. Replacement starts to make sense when the wall is rotating along its length, several panels are cracked through, or repairs keep coming back, and it has to meet the city's current elevation standard. A contractor who does both should be willing to tell you which side of that line you are on and why. See repair or replace for how to read the signs yourself first.
Seawall repair questions
Who does seawall repair in Boca Raton?
This site is a free referral service, not a repair company. Tell us what is going on with the wall and we connect you with a licensed marine contractor who does the repair.
How do I check that a contractor is licensed?
Ask for their license number and look it up on MyFloridaLicense.com. Florida requires licensed contractors to include their registration or certification number in offers, bids, contracts, and advertisements, so it should already be on the paperwork.
Does a repair need a city permit?
Structural seawall work in Boca Raton generally needs a city permit, pulled by a contractor registered with the city. The application needs plans, a survey or site plan, and an engineer's seal. See the permits and elevation guide for the full checklist.
Does a repair have to meet the 4.0 foot elevation rule?
The city's elevation standard applies to any new or replaced seawall or dock. A repair that does not replace the wall is a separate question for your contractor and the city's plan reviewer to confirm on your specific permit.
Get your wall looked at
Send a request and we will pass it to an independent licensed marine contractor who works Boca Raton canals and the Intracoastal. Have your address ready and, if you can, a few photos of the wall.
Free referral service. An independent licensed marine contractor does the work. How this works.
